When Windows Hello not working stops your face or fingerprint sign-in, sign in with your PIN, then go to Settings → Accounts → Sign-in options and use Improve recognition, or remove and set up face or fingerprint again. If that fails, update or reinstall the camera or fingerprint driver, check Enhanced sign-in security for external devices, and reset the PIN if that is what fails.
Why Is Windows Hello Not Working?
Windows Hello usually stops working for one of four reasons: the sensor cannot get a good reading, the driver has changed or failed, a security setting blocks the device, or the PIN that sits underneath Hello has a problem. Matching your symptom to the cause saves time.
| Symptom | Likely cause | Where to start |
|---|---|---|
| Face sign-in says it couldn't recognise you | Lighting, dirty lens, changed appearance | Improve recognition, or remove and set up again |
| Fingerprint not recognised | Dirty or damp sensor, poor enrolment | Clean the reader, add more fingers |
| Face or fingerprint option missing or greyed out | Driver problem, or the hardware does not support Hello | Device Manager and Windows Update |
| External webcam or USB reader ignored | Enhanced sign-in security is on | Sign-in options → Additional settings |
| Windows asks you to create a PIN again, or the PIN fails | PIN or security update issue | Reset the PIN |
One piece of background explains a lot of these problems. Windows Hello face and fingerprint sign-in are built on top of your PIN, and on PCs with a TPM (Trusted Platform Module, a security chip) the sign-in keys are protected by that chip. If the PIN breaks or the TPM is reset, biometric sign-in breaks with it. Our explainer on TPM.msc and how to check your TPM covers that side.
How Do You Fix Windows Hello Face Recognition?
You fix Windows Hello face recognition by improving the conditions first, then refreshing the face data Windows stores. Microsoft's Windows Hello troubleshooting tips recommend these steps.
- Clean the camera lens and make sure nothing covers it, including a privacy shutter.
- Avoid strong light from one side, and remove hats or accessories that shade your face. Face sign-in can also struggle in a very dark room on recent Windows builds, so add some light before assuming a fault.
- Open Settings → Accounts → Sign-in options, expand Facial recognition (Windows Hello) and select Improve recognition. Do it once with glasses and once without if you wear them.
- If recognition is still poor, select Remove in the same place, then Set up to scan your face from scratch.
Face recognition for Windows Hello needs a compatible camera with infrared (IR) sensing, not just an ordinary webcam. That is why a laptop with a normal 1080p webcam may show no face option at all; the hardware simply does not support it.
How Do You Fix Windows Hello Fingerprint?
You fix fingerprint sign-in by cleaning the sensor and re-enrolling, because most failures come from a poor original scan or a dirty reader.
- Wipe the sensor with a dry, lint-free cloth and make sure your finger is clean and dry.
- Open Settings → Accounts → Sign-in options → Fingerprint recognition (Windows Hello).
- Select Add a finger and enrol a second finger, capturing the edges and different angles as prompted.
- If the existing print still fails, select Remove, then set up fingerprint sign-in again.
How Do You Fix Windows Hello Driver Problems?
If the face or fingerprint option is missing, greyed out, or vanished after an update, the driver for the camera or reader is the likely cause, and reinstalling it is the fix.
- Open Settings → Windows Update → Advanced options → Optional updates and install any camera, biometric or chipset drivers offered for your PC.
- Right-click Start and open Device Manager.
- Expand Biometric devices for a fingerprint reader, or Cameras for the IR camera.
- Right-click the device and choose Update driver. If that does not help, choose Uninstall device, then restart; Windows reinstalls the driver on startup.
- If the problem started right after a driver update, open the device's Properties → Driver tab and select Roll Back Driver if it is available.
- Check the PC maker's support site for its own biometric driver, which is sometimes newer than the one Windows Update provides.
Driver changes have a direct effect on Hello. When a different driver loads, Windows may treat the sensor as new, so you may need to set up face or fingerprint again after reinstalling.
Why Won't Windows Hello Work with an External Camera or Fingerprint Reader?
An external webcam or USB fingerprint reader often fails because Enhanced sign-in security is turned on. Microsoft's page on using third-party fingerprint readers and cameras with Windows Hello says this feature is not supported for external camera modules, and only some external readers support it.
- Open Settings → Accounts → Sign-in options → Additional settings.
- On Windows 11 version 24H2 and later, turn off Enhanced sign-in security. On older versions, the toggle sits under Sign in with an external camera or fingerprint reader.
- Set up face or fingerprint again with the external device.
Microsoft notes that turning it off removes existing enhanced sign-in enrolments and linked credentials such as passkeys, which you can set up again. If you do not see the toggle, your organisation may manage it, or your PC may not need it.
What If Your Windows Hello PIN Is Not Working?
If the PIN fails, or Windows keeps asking you to create one, reset it, because face and fingerprint sign-in depend on it.
- On the sign-in screen, select I forgot my PIN and verify with your Microsoft account password or the method shown.
- If you can sign in, open Settings → Accounts → Sign-in options → PIN (Windows Hello) and choose to change or reset it.
- If PIN creation shows an error, sign out, sign back in and try again, then install pending updates.
Our guide on how to change your PIN on Windows 11 walks through each screen. If the PIN error mentions the TPM, see our Device TPM problem fix guide.
A Common Mistake We See
A common mistake is assuming Windows Hello problems mean Windows itself is damaged and reinstalling straight away. A reinstall removes your PIN, face and fingerprint data, and if the real cause was a driver or the Enhanced sign-in security setting, the problem returns as soon as you set Hello up again. Work through recognition, drivers and settings first.
Work and school PCs are the other trap. If an organisation manages the device, Windows Hello can be enabled, disabled or restricted by policy, and enhanced anti-spoofing may make face sign-in stricter in low light. In that case, the fix sits with your IT administrator. If you do rebuild a personal PC, our genuine Windows 11 keys reactivate cleanly and our support team can help with activation.
Frequently Asked Questions
Why did Windows Hello stop working after an update?
Updates can replace the camera or fingerprint driver, or ask you to recreate your PIN for security reasons. Check Optional updates for a newer driver, roll back the driver in Device Manager if the problem began after a driver change, then set up face or fingerprint again in Sign-in options.
Why is Windows Hello face not available on my laptop?
Windows Hello face needs an infrared camera that supports Hello. Many laptops only have a standard webcam, so the face option never appears or says it is unavailable. You can still use a PIN, a fingerprint reader if fitted, or an external Hello-compatible camera with Enhanced sign-in security turned off.
How do I reset Windows Hello?
Open Settings → Accounts → Sign-in options, select Remove under facial or fingerprint recognition, then Set up again. If the PIN itself is the problem, reset it from the PIN section or the sign-in screen, then set up face or fingerprint again. You will need your account password or another verification method.
Can I use Windows Hello on Windows 11 Home?
Yes. Windows Hello PIN, face and fingerprint sign-in are available on Windows 11 Home and Pro, provided the hardware supports face or fingerprint. Windows Hello for Business, which organisations manage centrally, is a separate feature aimed at work and school devices.
Is it safe to turn off Enhanced sign-in security?
It lowers one layer of protection. Microsoft's hardware documentation explains that the feature uses virtualisation-based security and TPM 2.0 to isolate and protect sign-in data, so turning it off removes that extra isolation. Microsoft documents turning it off as the way to use external cameras and readers that do not support it. If your built-in sensors work, keep it on; turn it off only when you need an external device.
Conclusion
With Windows Hello not working, start with the basics: sign in with your PIN, improve or redo recognition, then update or reinstall the camera or fingerprint driver. Check Enhanced sign-in security for external devices and reset the PIN if that fails. If you are upgrading to a PC that supports Hello, licence it with a genuine key from our Windows 11 Pro range.
Useful Links
| Resource | Link |
|---|---|
| Windows 11 product keys | Shop Windows 11 |
| Change or reset your PIN | Change Your PIN on Windows 11 |
| Check your TPM | TPM.msc Explained |
| TPM error fix | Device TPM Problem Fix |
| Windows Hello tips (Microsoft) | Microsoft Support |
| External readers and cameras (Microsoft) | Microsoft Support |
Leave a comment